DFW Property Detailing Lannon Stone Cleaning
How to Clean Lannon Stone
Lannon stone is a type of limestone known for its light coloring and unique surface. As a porous stone, it requires a particular level of care when cleaning. Doing daily maintenance by wiping up any spills and regularly dusting can reduce the accumulation of dirt and grime. Complete a deep cleaning with a stone solution every month or so for even better results. With a little bit of effort your lannon stone surfaces can last for a lifetime.
Cleaning on a Regular Basis
Remove dirt and dust weekly.Get a microfiber mop and do a dry run over your stone floors at least once a week. If your lannon stone surrounds a fireplace, use a microfiber cloth to dust it off weekly. The same goes if you have lannon countertops. The goal is to keep grime, dust, or debris from accumulating on the surface of the stone.
- Be careful vacuuming if you have lannon floors. Only use a vacuum designed for hardwood or stone flooring, as it will be less likely to leave scratch marks behind.
Wipe up any spills immediately.Lannon is an absorbent stone, so it will take in any liquids that sit on its surface for very long. This could lead to staining with darker fluids, such as red wine. As soon as you notice a spot, grab a microfiber cloth and wipe it up. Then, wet down a paper towel with water and run it over the area of the spill.
Remove any stickiness.If the surface of the stone feels sticky, even after wiping it with a moistened rag, go ahead and re-wipe it with a damp microfiber cloth that has a few drops of dishwashing liquid on it. Then, pass over the area once more with a clean, moistened cloth to remove any residue from the dish soap.
Doing a Deep Clean
Purchase the correct cleaning solution.Look for a detergent cleaner that is made specifically for limestone-type stones, like lannon or marble. You can find these cleaners at your local home improvement or hardware store. Professional floor installers can also recommend cleaning solutions.
Dilute detergent in water.Get a bucket and fill it up with water. Add the cleaning solution until you reach a ratio of one part solution to five parts water. Watering down the solution helps to prevent it from eating through the surface of the stone and causing pockets of damage.
Apply the mixture with a sponge.Grab a clean sponge, dip it into the bucket, and apply it generously over the surface of the stone. The stone should be visibly saturated, almost to the point of dripping. When the water in the bucket gets murky, empty it out and replace it with clean solution.
- If there are areas that you can’t reach, try pouring the solution into a bottle. Then, you can spray it onto the higher up spots on the stone.
Let the cleaner sit for 10-15 minutes.Once all of your lannon stone is saturated with cleaning solution, leave it alone. This lets the solution fully absorb into the stone, so that it can loosen any deep dirt or grime. If the solution seems to dry well before the 15 minutes are up, it’s okay to add a bit more.
- This is a general suggestion regarding how long you should leave generic stone cleaners on lannon. Make sure to follow the specific directions that come with your cleaning solution if they differ.
Scrub the stone to remove any stubborn dirt.When the 15 minutes are up, take out your scrub brush or sponge and begin to rub in tight circles over the stone surface. Do your best to get into all of the natural cracks and crannies on the stone. Scrub the entire area evenly or you may end up with one spot appearing lighter/cleaner than the others.
- A variety of scrubbers will work well, but many people suggest using a standard scrub brush with nylon bristles.
Rinse off with clean water.Find a bucket and fill it up with fresh water. Dip a rag or sponge into the water and apply it to the surface of the stone. Your goal is to rinse off all of the chemical residue and any dirt that you loosened by scrubbing earlier. If you are cleaning lannon floors, then use a clean mop pad for this step.
Dry off with clean towels.Gather up some clean microfiber towels and apply them to the stone surface. Move them around until all of the moisture is removed. You may need to apply some pressure to reach into all of the stone’s imperfections. It may take up to 24 hours for the stone to fully dry.
- A dry mop pad (or more than one) can be used if you are cleaning a lannon stone floor.
- If you are cleaning in an enclosed space, it may speed up the drying process if you open up a few windows or turn on a fan.
Test the stone with a damp meter.It’s important to ensure that you get all of the moisture off of the stone to prevent the growth of mold. You can apply a device called a damp meter to the surface of the stone and it will tell you if any moisture remains. If you get a reading showing a high moisture percentage, continue to dry out the stone with a fan or additional towels.
Use a buffing machine to make floors shiny.You can rent these from a hardware store or buy a handheld version. Put a fresh burnishing cloth on the machine and go over the stone in small circles. Generally, the only fluid that you’ll need is a small squirt of water to help the pad slide over the stone’s surface.
Avoiding Damaging Your Stone
Watch for signs of damage.Lannon stone can show signs of wear and age within months, if not cared for properly. Watch for obvious discoloration, such as black streaks caused by grime. Green or yellowish lines or patches may be due to mold growth. Excessive flaking or chipping means that the stone is absorbing too much moisture.
Apply a coat of protectant.There are commercial sealing products that are made specifically for stone. Purchase the protectant at a hardware store or by contacting a flooring professional. Some protectants require a spray on application whereas others can be brushed directly on to the stone. Follow the directions on the package carefully.
Test any cleaning products in an inconspicuous area.Before you apply any cleaner to a broad area, dab a small amount of it onto an area of the stone that is not readily visible. Let the cleaner sit for 10-15 minutes, then wipe it away with a clean rag and water. See if any discoloration or damage is visible.
Use caution when pressure washing.If you are cleaning lannon stone outside, it can be tempting to use a pressure washer to speed up the washing process. However, make sure to keep the PSI (water pressure) on the lowest setting or you could chip away or etch the stone. It’s also best to use a wide tip nozzle that will keep the water spread out over an expanded surface.
- As you are cleaning, keep the nozzle as far away from the stone as you can. Otherwise, you’ll increase the likelihood of damage.
Keep your stone away from any acidic products.Lannon stone responds really poorly to acidic cleaners, like bleach, and will actually start to fall apart. It’s also important to avoid placing acidic liquids, such as orange juice, onto the stone. As a general rule, anything that you use on the stone should have a low pH level.
Keep heat away from the stone.Lannon fireplaces have a protective inner shell to protect the stone, but countertops are usually more vulnerable. Make sure to place a mat, towel, or trivet under any hot drinks or dishes before setting them on your lannon stone. If you notice that your lannon stone appears especially powdery, that is a sign of heat damage.
Video: DFW Property Detailing lannon stone cleaning Dallas Texas
Drowning in Air: Surviving Allergic Asthma
How to Recover from Lost Sleep
20 Ideas for Bob Braids in Ultra Chic Hairstyles
Sleeping on a complex decision may be a bad idea
Daily Deals: Summer Sale At ASOS, 20 Off At Ben-Amun
10.Alpina AL750N4E6B Alpiner Automatic Silver Watch
The keto diet can impact gut bacteria which affects our hair, skin, and nails
Rihanna Is The First Woman to Win Shoe of The Year
The High-Tech Facial That Boosts Skin Glow in 60 Minutes
Smart Ways to Zap Sponge Germs
Symptoms and Conditions That May Be Treated With Hysterectomy
21 Gender Reveal Games Everyone Will Absolutely Love